Skip to main content

SQ-SERIE Hydraulische momentsleutel met andrijfvierkant

SQ-SERIE Hydraulische momentsleutel met andrijfvierkant

De vorm van de toekomst gecombineerd met bewezen duurzame technologie

De SQ-serie is een meesterwerk van stijl, mogelijkheden en duurzaamheid. Nu met ons geperfectioneerde Uni-Swivel-ontwerp, kan de SQ zich aanpassen aan elke toepassing op het werkterrein. Binnen deze tool vindt u onze bewezen "Three Moving Part" -technologie die een toepassingsnauwkeurigheid van +/- 3% biedt. Ontworpen om elke toepassing onder de knie te krijgen, combineert de SQ zijn verbazingwekkende uiterlijk met de veiligste en meest betrouwbare resultaten.

De best uitziende hydraulische sleutel ter wereld!

  • Made in the USA
  • Zeven Modellen van 179 Nm. t/m 16145 Nm.
  • Alle sleutels gekalibreerd in ISO17025 laboratorium
  • Vervaardigd met AQ gecertificeerde legeringen
  • Een TorcUP-ontwerp

De SQ-serie bewijst dat TorcUP opnieuw de producent is van "De best uitziende hydraulische sleutel" - FEIT. We hoeven niet te zeggen dat deze tool er GEWELDIG uitziet, omdat onze concurrenten dat wel doen !! De SQ-serie ziet er net zo goed uit en profiteert van een volledig VASCOMAX "Three Moving Part" componentensysteem. Geen enkel ander bedrijf maakt AL hun interne koppelcomponenten uit VASCOMAX… Alleen TorcUP.

Kenmerken

Patented Mono-Body Housing

Patented Mono-Body Housing

This feature is a TorcUP exclusive. The SQ Series housing is machined from a single block of 7075 AQ Aluminum, which reduces torsion and flex on the body of the tool under pressure.

Uni-Swivel

Uni-Swivel

The 360 degree by 180 degree uni-swivel allows for shorter tool length thereby accommodating applications with obstructions.

Push-Through Drive

Push-Through Drive

The push-through square drive allows the user to switch easily from loosen to tighten without having to remove the drive.

Steel Reaction Boot

Steel Reaction Boot

This feature protects the main reaction point of the arm and is field replaceable.

Laser Engraved Torque Chart

Laser Engraved Torque Chart

The dual sided shroud is laser engraved with the torque chart for the SQ Series, preventing lost charts during use.

Reaction Arm Release Button

Reaction Arm Release Button

The release button for the reaction arm is set within the arm as a safety feature, protecting the arm from accidental disengagement.

Multi-Tooth Drive Segment

Multi-Tooth Drive Segment

This design ensures a 27 degree stroke each time the tool fully advances.

No Drip Quick Connect Couplers

No Drip Quick Connect Couplers

These 3:1 rated safety couplers are designed for simple engagement. The coupler collar ensures safe operation.

Technische data

Part #SQ-1SQ-3SQ-5SQ-10
Square Drive 3/4" 1" 1 1/2" 1 1/2"
Minimum Torque (Ft/lbs) 132 292 587 1198
Maximum Torque (Ft/lbs) 1345 3425 5920 11908
Minimum Torque (Nm) 179 396 796 1624
Maximum Torque (Nm) 1824 4644 8029 16145
Output Accuracy +/-3% +/-3% +/-3% +/-3%
Repeatability 100% 100% 100% 100%
Duty Cycle 100% 100% 100% 100%
Tool Weight (lbs) 5.5 11 18 32
Tool Weight (Kg) 2.5 5 8.4 14.5

Part #SQ-1SQ-3SQ-5SQ-10
Height 3.76" /
95.5mm
4.91" /
124.71mm
6.05" /
153.67mm
7.34" /
186.44mm
Length 1 4.91" /
124.71mm
6.48" /
164.59mm
7.95" /
201.93mm
9.85" /
250.19mm
Length 2 6.47" /
164.34mm
8.48" /
215.39mm
10.70" /
271.78mm
12.85" /
326.39mm
Radius 0.99" /
25.15mm
1.31" /
33.20mm
1.57" /
39.88mm
2.13" /
54.10mm
Width 1 2.00" /
50.8mm
2.63" /
66.8mm
3.13" /
79.5mm
3.95" /
100.33mm
Width 2 2.75" /
69.85mm
3.68" /
93.5mm
4.64" /
117.86mm
5.47" /
138.94mm
Width 3 4.42" /
112.3mm
5.92" /
150.37mm
7.00" /
177.8mm
8.74" /
222.0mm

Accessoires

SQ Direct Hex Drive Adaptor

SQ Direct Hex Drive Adaptor

Replace the square drive of your SQ tool with this hex drive adaptor to drive socket head cap screws.
SQ End Cap Protector

SQ End Cap Protector

This accessory provides protection for the end cap when operating the tool without the reaction arm.
SQ Extended Reaction Tube

SQ Extended Reaction Tube

Attach this reaction tube in place of the standard reaction arm when your reaction point is located further from the nut.
SQ Solid Square Drive

SQ Solid Square Drive

This square drive provides a non-push-through variation for tightening and loosening.
SQ Solid Long Extension Arm

SQ Solid Long Extension Arm

This solid reaction arm is 6" longer than the standard reaction arm of each tool, allowing for a further reaction point.
SQ Wide Reaction Arm

SQ Wide Reaction Arm

When your reaction point does not hit firmly at the center of the standard arm, this arm provides a wider reaction plane. This can be factory installed as an option. Only available for the SQ-1 and SQ-3.
SQ Tool Handle

SQ Tool Handle

This ergonomically designed handle for TorcUP hydraulic tooling can be attached to the tool for safe operation and positioning of the tool, while keeping hands clear of any reaction points.

Documenten / Downloads