Skip to main content
MiniFacer series – manual flange facing

Sygma MiniFacer SB manual flange facing machine

For flanges with a small bore, from 13.5 mm
  • Brand
    Sygma
  • Machining
    Flange machining
  • Clamping
    Internal (ID)
  • Clamping range
    Ø 13.5 – 30.5 mm (0.53 – 1.18″)
  • Machining range
    Ø 13.5 – 350 mm (0.53 – 14″)
  • Drive
    Manual
  • Machine weight
    6.5 kg (ready for use)
  • Available for
    Buy, Rent
Request a quote
Renting? View rates
Sygma MiniFacer SB manual flange facing machine

The Sygma™ MiniFacer SB (small bore) is specially developed for flanges with a small bore. You clamp it internally in bores from Ø 13.5 to 30.5 mm. The simplified clamping system makes your flanges flat again in no time, up to Ø 350 mm (14 inch).

Set up in minutes, machining in seconds, by one person. The MiniFacer SB works without a motor, so without compressed air or power. This gives you a crisp result every time, even in places where a powered machine cannot or may not go.

Would you like to buy or rent the machine, or does the standard version not suit your job? Contact us.

Features

Manually operated

No compressed air or power needed: one person sets up the machine in a few minutes.

Quick and easy to set up

Set up in minutes, machining in seconds.

Suitable for Ex zones

Manually operated, so safe to use in zones with explosion hazard.

Coated clamping parts

All clamping parts are coated and suitable for stainless steel and other flange materials.

Rugged case

Everything is stored neatly and protected in one case.

2-year warranty

Sygma gives a two-year warranty on the MiniFacer.

Applications

Restoring flange faces

Restoring gasket faces to flat and the right finish on site.

Hard-to-reach flanges

Small and light, so also usable where a large machine does not fit.

Ex zones

Manually operated and therefore suitable for zones with explosion hazard.

Technical data

  • Minimum
    Ø 13.5 mm (0.53″)
    Clamping range
  • Maximum
    Ø 30.5 mm (1.18″)
    Clamping range
  • Minimum
    Ø 13.5 mm (0.53″)
    Machining range
  • Maximum
    Ø 350 mm (14″)
    Machining range
  • Case dimensions
    570 × 440 × 260 mm
    Dimensions and weight
  • Weight of complete case
    15 kg
    Dimensions and weight
  • Machine weight (ready for use)
    6.5 kg
    Dimensions and weight
  • Machine length
    340 mm (13.5″)
    Dimensions and weight
  • Height from flange face
    200 mm (8″)
    Dimensions and weight
  • Min. swing diameter
    Ø 460 mm (18″)
    Dimensions and weight
  • Supplied as standard
    Tool kit
    Case
    Screws
    Mounting clamps
    CE certificate
    Manual
    Scope of delivery

Videos

Rental

From € 69 excl. VAT
per day
Request rental
All rental rates

Related products

Documentation