Skip to main content

TLM Torque Load Management

TorcUP TLM, Torque Load Management

The TorcUP model TLM, Torque Load Management, defines the state of the art in the measurement of the actual elongation produced by tightening a threaded fastener. The TLM can measure the elongation very accurately in fasteners of virtually any material from 1/2 inch to 4 feet in length.  
The measurement is achieved by determining the change in the transit time, of an ultrasonic shock wave along the length of the fastener as the fastener is tightened by any method. The on-board microcomputer automatically interprets this time measurement to display the time (nanoseconds), elongation, load, stress, or %strain from stretching a fastener.  
Through the use of high speed digital signal processing and automated diagnostics, the TLM-1 minimizes the requirement for extensive operator training. With built in data recordation and reporting through an RS232 interface, the TLM offers an easy to use and reliable solution to the most difficult bolting problem.

TorcUP TLM, Torque Load Management
  • Key Features

    • The first cost effective ultrasonic solution available on the market.
    • Effectively monitor your bolts during periodic shutdowns over the service life of the fastener.
    • Visually compare the unloaded to the loaded waveform.
    • Measurement quantities - Time (nanoseconds), Elongation, Load, Stress, and %Strain.
    • Display Options - RF, Rectified, Large Digits with Limits Bar.
    • Display Resolution - 1/8" VGA 240 x 160 pixels.
    • Stores 8000 readings and waveforms in multiple groups.
    • Built-in Linear regression or vector for optimizing load measurements.
    • The Auto Set feature automatically optimizes detection and adjusts display.
    • Hi/Lo alarm tolerance limits work in conjunction with the data port and external pump shut-off device
  • Documents / Downloads