RP-E6 SERIES Pneumatic Torque Wrench

The Most Robust Wheel Bolting Pneumatic Torque Wrench In The Industryy
The RP-E6 series wrench is a torque instrument designed for use on the most accuracy critical applications in the world, Wheel Bolting! With the use of standard industrial sockets every bolting application is met with repeatable torque to an accuracy of +/-5%.
Lengthen the reach of the torque tool barrel
- Made In USA
- One Model Capable of 1,030 Ft/Lbs 1396nm.
- Every Unit Calibrated In ISO17025 Laboratory
- Manufactured With AQ Certified Alloys
- Genuine TorcUP Design
The RP-E6 in designed to lengthen the reach of the torque tool barrel into depth and width critical locations – the typical application being that of rims installed on large trucks and mining (OTR) equipment. However, if your bolting application requires up to 1,030 ft/lbs of torque and the fastener is nestled in a deep and tough to reach location, we meet the challenge also with the RP-E6. So whether you are bolting rims to your large mining machine or assembling a large pump with fasteners in deep pockets, your application can be handled by the RP-E6 with ease.
-
Specifications
Model # RP-1000E6 Square Drive 3/4" Min. Torque (Ft/Lbs) 148 Max. Torque (Ft/Lbs) 1030 Min. Torque (Nm) 201 Max. Torque (Nm) 1396 Output Accuracy @ Set Torque +/- 5% Repeatability 100% Duty Cycle 100% Weight w/o Arm 14lbs/6.4kg RPM @ 10 psi 7 Tool Max psi 70 RPM @ Max psi 15 Requirements Air pressure 10-70 psi / Flow 45-55 CFM -
Dimensions
Model # RP-1000E6 Height 7.89" /
199.6mmSquare Drive 0.75" /
19mmLength 13.74" /
348.9mmDiameter 1 2.62" /
66.5mmDiameter 2 1.87" /
47.5mm -
Features
Integral 6" Nose Extension
The nose of the tool has an integral 6" extension at the 3/4" square drive.Ergonomic Pistol Grip
The pistol grip of the RP Series was designed to allow for firm and comfortable positioning. It is finished with a durable slip-resistant textured coating.Compact Air Motor
The lightweight ultra-efficient air motor is designed for easy maintenance.Cast Reaction Arm
The sturdy "non-welded" construction provides a safe and strong reaction point.Internal Gear Drive
The RP Series employs a patented planetary gear design which increases torque multiplication without added weight and bulk.Dual Operation Trigger
The trigger allows for forward and reverse operation without grip repositioning -
Accessories
Filter/Regulator/Lubricator Unit
The RP-FRL Unit is used to filter and lubricate the air supply, as well as regulate the pressure to achieve desired torque output. The unit comes complete with a pressure gauge and 8’ connecting air hose, and is fitted with a one-piece welded steel frame for protection and transport.Long Extended Reaction Arm
Used with deepwell socketsSocket to Socket Reaction Arm
Allows the operator to react against the adjacent nut using a cup to protect it. It allows to adjust the socket to socket between 4” and 6” away from the square drive of the toolStraight Reaction Arm
This arm is designed to accommodate a reaction point at a 90 degree angle from the drive.Weld Blank
This reaction arm is made of raw steel and allows the customer to fabricate their own custom arm. The weld blank is splined to fit the RP Series and includes heat treating specifications. -
Documents / Downloads